|
Alti-2 offers the following accessories to support our product line:
|
 |
Neptune now has Armor This silicon
rubber cover will help to protect your Neptune when you use it as a visual
altimeter.
(Neptune not included - of course)
Alti-2 part #C-01191 |
|
 |
Neptune screen protectors now available. The protector is a
self adhesive vinyl overlay that protects the screen from scratches and
dings, when the overlay gets damaged, just peel it off and apply a new one.
Six screen protectors are included in each package
Recommended retail price is $5.95 per package
They are available now from your dealer.
Alti-2 part #C-01186 |
 |
This adapter can be used with both laptops and
desktops.
Alti-2 part #C-01270 |
|
The new galaxy
wristmount is designed primarily for freeflyers, tandem instructors. & AFF
instructors.
(Altimaster galaxy not
included)
Alti-2 part #C-00046W |
hand mount
The traditional
hand mount comes standard on the Altimaster III Galaxy and Stratosphere.
(Altimaster galaxy not included)
Alti-2 part #C-00046 (Velcro wrist strap) & C-00062 (hand
mount) |
|
Replacement Velcro wrist straps are available for hand
mounts.
Alti-2 part #C-00046 |
The Altimaster
II wristmount kit is supplied with a Velcro wrist strap, two U brackets, and
four screws.
Alti-2 part #SA-02025 |
|
This replacement screw-in
lens is suitable for the new Altimaster galaxy and stratosphere only, the
older Altimaster III lens can only be replaced at the factory.
It is important NOT to push down on a lens
when you are removing the old lens or inserting a new one, pushing down just
locks the lens into the thread and makes it difficult to turn.
If you have any problem in removing a lens we suggest you use a "sticky
pad" such as the type used for removing the lids of jars.
Alti-2 part #C-00050 |
Replacement lens for Altimaster II.
Alti-2 part #C-00006 |
|
The Altimaster II light attachment fits
around the lens and holds one or two (user choice) chemical light sticks
against the edge of the lens. The face is evenly illuminated.
We recommend that the attachment is fitted to the right
side of the altimeter to illuminate the 0-6000ft sectors.
The attachment requires the use of at least one U
bracket (supplied separately)
Screws
are supplied to for attachment to either Altimaster II or the thicker
military lighted models.
Alti-2 part #SA-02045 |
|
